General
Information
|
CT2-1 is an oil-soluble and film forming corrosion inhibitor,
which can inhibit corrosion of H2S
and CO2 in oil and gas wells and
gathering and transportation pipelines.
|
Typical
Physical Properties
|
Appearance : brown liquid
Density (20)g/ml : 0.95~0.97
Flash point : 740
Kinematic Viscosity(20)mm square/s :<4.0 - 10#-6
Degree of protection% : 95(Q/CY 176-92)
|
Chemical
Description
|
Mixture of organic compounds and solvent.
|
Suggested
Treating Methods and Rates
|
At first, use CT2-1 to pre-treat pipelines. The quantity (liters)
for pre-treatment (Q) equals 2.4 times pipe diameter (cm) (D)
times pipe length (km) (L) (Q=2.4DL). And then, continuously
or batchly treat pipelines. In continuous treatment, CT2-1
injection quantity is 1000~3000mg/L liquid produced. In batch
treatment, CT2-1 injection quantity is related to gas flow
quantity as follows:
Gas flowing quantity CT2-1 batch injection quantity
10#4m#3/dkg/month
<15 : 50
15~30 : 70
30~50 : 90
>50 : 110
|
Packaging
|
CT2-1 is packaged in 100-litre or 200-litre iron barrels.
|
Storage
and Handling
|
CT2-1 should be stored in cool, dry and well-ventilated place
away from fire and heat. The storage time should not exceed
one year. Avoid contact with skin. In case of contact, wash
immediately with detergent and water.
|