General Information
CT2-15 is a water-soluble, oil-dispersible and organic film-forming corrosion inhibitor which can inhibit corrosion of H2S and CO2 in oil wells and gas wells and gathering pipelines and transportation pipelines.

Typical Physical Properties

Appearance : brown liquid
pH : 7~8
Density (20)g/ml : 025~1.030
Solidification point : -10
Kinematics Viscosity (20)mm square/s : 10~14
Solubility : water-soluble, Oil-dispersible
Degree of protection % : 86.0
Chemical Description

Mixture of organic compounds and solvent.



Suggested Treating Methods and Rates


At first, use CT2-15 to pre-treat pipelines. The quantity (liters) for pretreatment (Q) equals 2.4 times pipe diameter (cm) (D) times pipe length (km) (L) (Q=2.4 DL). And then, continuously treat pipelines. CT2-15 continuous injection quantity is 0.5kg/m cube liquid produced.

Packaging
CT2-15 is packaged in 200-litre iron barrels or 50-litre plastic barrels or as required by the customers.
Storage and Handling

CT2-15 should be stored in dry and well-ventilated place. The storage time should not exceed two years. Avoid contact with skin. In case of contact, wash immediately with water.








 
 

 

 


Copyright 2002 © Unitech Asia Pacific Limited
All rights reserved.