General Information
CT2-4 is water-soluble and film forming corrosion inhibitor, which can inhibit corrosion of H2S and CO2 in oil and gas wells, and gathering and transportation pipelines.

Typical Physical Properties

Appearance : brown liquid
Density (20)g/ml : 1.025~1.030 GB/T 1884-92
Solidification point : -10 GB/T 510-83
Degree of protection% : 93 (Q/CY 456-1998)
Chemical Description

Mixture of organic compounds and solvent.

Suggested Treating Methods and Rates
At first, use CT2-4 to pre-treat pipelines. The quantity (liters) for pre-treatment (Q) equals 2.4 times pipe diameter (cm) (D) times pipe length (km) (L) (Q=2.4DL). And then, continuously treat pipelines. CT2-4 continuous injection quantity is 0.5kg/m cube liquid produced.CT2-4 should be diluted with water at a ratio 1:3~5 before injection.

CT2-4 is packaged in 200-litre iron barrels or 50-litre plastic barrels.

Storage and Handling

CT2-4 should be stored in cool, dry and well-ventilated place. The storage time should not exceed one year. Avoid contact with skin. In case of contact, wash immediately with water.




Copyright 2002 © Unitech Asia Pacific Limited
All rights reserved.